EPEVER SOLAR CHARGE CONTROLLER SETUP: TRACER AN SERIES CONTROLLE

EPEVER SOLAR CHARGE CONTROLLER SETUP: TRACER AN SERIES CONTROLLE

Blog Article

The EPEVER Tracer AN Sequence Photo voltaic Demand Controller is really a extremely productive photo voltaic controller created for off-grid solar techniques. Determined by multiphase synchronous rectification know-how, it guarantees optimized Strength conversion and procedure steadiness for a variety of photovoltaic (PV) applications.

Critical Characteristics from the EPEVER Tracer AN Collection Controller
The Tracer AN series utilizes EPEVER Solar Demand Controller technological know-how for exceptional solar Power harvesting. Important attributes consist of:

Multiphase Synchronous Rectification (MSR) for improved Vitality conversion.
Superior MPPT Algorithm with >99% performance.
Twin-Stage Charging for Increased battery daily life.
Liquid crystal display Show with actual-time info monitoring.
Numerous Load Control Modes which includes guide and timer.
Complete Electronic Protections versus overcharging, about-discharging, limited circuits, and reverse polarity.
Stage-by-Phase Information to Setting Up the EPEVER Tracer AN Collection Controller
one. Unboxing and Planning the Controller
Make certain all elements are incorporated: Tracer AN unit, temperature sensor, conversation cables, and user handbook.
Validate the product range and voltage rankings match your solar panel and battery specifications.
two. Mounting the Demand Controller
Pick out a properly-ventilated, dry spot close to the battery bank.
Secure the Tracer AN controller using the supplied mounting brackets.
Preserve proper clearance for warmth dissipation.
three. Wiring the Photo voltaic Charge Controller
Caution: Usually follow good basic safety protocols and ensure the method is run off in advance of connecting parts.

Stage 1: Hook up the battery terminals for the charge controller (favourable to positive, destructive to damaging).
Stage 2: Hook up the solar panel array to the PV enter terminals.
Phase 3: Join the load terminals if utilizing a direct load relationship.
Phase 4: Double-Look at all connections for polarity and tightness.
four. Configuring the Controller Options
Power over the controller by connecting the battery 1st.
Use the Liquid crystal display Screen to navigate the settings menu.
Configure:
Battery Form: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Handle Modes: Handbook, timer, mild Regulate.
5. Monitoring and Knowledge Logging
The Tracer AN Collection supports authentic-time monitoring utilizing the MT50 remote meter.
Facts could be logged via the RS485 interaction port employing software program such as Solar Station Computer.
Remote checking is achievable While using the EPEVER WiFi module.
6. Troubleshooting Frequent Concerns
Issue 1: No Click Here Energy Output

Test battery voltage and connections.
Confirm PV panel voltage exceeds battery voltage.
Difficulty 2: Around-Voltage Safety

Validate the solar array’s voltage ranking.
Alter procedure parameters if necessary.
Difficulty 3: No Battery Charging

Inspect PV wiring for continuity.
Ensure MPPT options within the menu.
Advantages of the Tracer AN Series with MSR Know-how
The multiphase synchronous rectification engineering makes sure:

Greater Effectiveness: Reduced Strength losses throughout conversion.
Improved Reliability: Stable effectiveness under variable masses.
For a longer period Battery Daily life: Consistent and correct charging profiles.
Summary
The EPEVER Photo voltaic Charge Controller with multiphase synchronous rectification know-how is definitely an Fantastic option for optimizing solar power era and increasing battery lifestyle. By adhering to the above mentioned setup guidebook, people can be certain optimum effectiveness and procedure longevity.